Wild Cape Buffalo - Rustic Double Tone Leather (SAMPLES)

Seidel (USA)

Please note: Images are representative of the actual product, but colors may vary due to device screens and dye lot differences. The leather you receive may appear different than what you see on your screen. When color accuracy is critical, we recommend requesting samples before ordering. Product descriptions are provided to the best of our knowledge—if you spot any errors, please let us know 

Write a review
Price
$ 2.00
  • Thickness: 2.2mm (5.5 oz) +/- 0.2mm
  • Firmness: Medium
  • Expected Yield:
Specifications
SPLITTING

Leather splitting is a custom service available down to your preferred thickness

Please note split leather can't be returned

There is a tolerance to leather splitting. While we have invested a lot of time and training into hitting a tighter tolerance range than advertised, sometimes the  leather articles and differing densities require the full tolerance range. 

Leather tolerance is denoted by +/- which means the leather can be both above and below that number by the denoted amount.

  • Example 1.2mm +/- 0.1mm.
  • This means that the leather could come anywhere ranging from 1.1-1.3mm across the hide. Most the time this amount is indiscernible to the naked eye, but should be noted if measuring with precise equipment

How we gauge the leather is with a thickness gauge that can reach both the edges and middle of the hide. We apply a moderate amount of pressure (Not too hard and not too soft)

Again our tolerances are tighter than the tanneries. We are usually well inside the range, especially on panels, but occasionally need the full range. Tolerance ranges are as follows: 

Splitting Panels: +/- (0.1mm).

Splitting Full Hides & Half Hides:  +/- 0.15mm

No Splitting (From Tannery Splitter):  +/- 0.2mm

  • The width of our splitter is 27-28 inches. If you have a hide that is larger we will trim the hide to fit and return you both pieces. We cut off the belly section leaving you the nicest area of the hide in tact.
  • Due to it requiring often multiple passes we do not send the split flesh part.

PRODUCT SPECS

  • Article:  Wild Cape Buffalo
  • Tannery:  South Africa
  • Full Grain: Yes
  • Tannage: Chrome Tanned
  • Cut: Side
  • Grain (Top): Rustic 2 Tone, Scratches and Unique Wild Characteristics
  • Flesh (Bottom): Hairy Nap 
  • Firmness: Medium 6/10 
  • Dye: Completely Through 
  • Finish: Full Aniline
  • Burnishable: No, Edge Paint Recommended
  • Thickness: 5.5oz (2.2mm) +/- 0.3mm
  • Splitting: Yes, down to 0.6mm  *Please note split leather cannot be returned & if hide is wider than 27" we will need to cut it into 2 pieces to fit the splitter (We cut closer to the belly side)
  • Restocked: Yes, every 3-4 months
  • Yield: Moderate 75%+, With a natural product like leather and also being from the wild there will be unique natural characterists to this hide like scratching,  there can be areas with neck and back wrinkles, veins, scars, bites, loose grain, but in general this article can expect an overall moderate cutting area. Whole hides and sides do include bellies where there can be some loose grain. This leather being full aniline (meaning the leather is very natural with no extra finishing on the surface to hide any flaws) darker colors will better hide any areas of concern. A key skill of using full aniline leather is the ability to work less desirable areas of the hide into the less visible areas of your projects. Overall this leather has a moderate cutting yield
  • Discounts: Yes, volume discounts automatically applied on full hides. Note Paypal does not load the discounts, please pay with credit card instead 

Please note the images are a representative of the actual product, however computer and device screens vary as do dye lots. The leather you receive may look different than it appears on your screen. We suggest that you request sample(s) before ordering when color is critical. Product descriptions are to the best of our knowledge, if you notice any errors please contact info@rmleathersupply.com

ADDITIONAL DETAILS

Wild Cape Buffalo is a softer, rustic leather with a two-tone matte finish, available in five colors. The leather is tanned in South Africa, and shows all its natural scars from life in the wild, giving each piece a unique look.

Perfect for small to large projects, it's ideal for artisans who want to highlight the leather’s natural beauty.

This article is full grain and has a nice supple feel. These hides are the tanneries top grades great for small and larger projects like totes, bags and duffles. Each hides is unique and will show the natural characteristics of a buffalo in the wild.

We know you will love this article and are looking forward to seeing it in your coming projects! Feel free to reach out if you have any questions.

      DIMENSIONS & PRICING

      • Sample: ~ 2x3 inches

      WHAT TO EXPECT?  

      ETHICALLY SOURCED LEATHER

      All of our hides are ethically sourced as a byproduct of the meat industry. Leather that might otherwise be overlooked is transformed into something lasting through your creativity.

      Fast Shipping

      Most orders ship the next business day so you can keep your projects moving.

      Customer Service

      Our team is here to answer questions and help you find exactly what you need.

      Satisfaction Guarantee

      Enjoy 30 days of hassle-free returns for peace of mind with each order.

      Staff Picks

      Outlet

      Inspiration

      General Info
      Tannery i Seidel
      Cut i Whole Hide and Side
      Material Characteristics
      Full Grain i Yes
      Grain (Top) i Aniline and Pullup
      Processing & Finish
      Tannage i Chrome Tanned
      Finish i Aniline and Pullup
      Physical Properties
      Firmness i Medium
      Thickness i 2.2mm (5.5 oz) +/- 0.2mm
      Splitting i Free Splitting
      Yield i

      Availability & Promotions