Badalassi Carlo - Nemesis - Rustic Veg Tanned Leather (PANELS)
For larger HIDES click HERE
PRODUCT SPECS
- Article: Nemesis (Rustic)
- Tannery: Badalassi Carlo 🇮🇹 (Italy)
- Full Grain: Yes
- Tannage: Vegetable Tanned
- Cut: Double Shoulder (No belly = higher yield)
- Grain (Top): Variation of small and smooth grain
- Flesh (Bottom): Smooth Nap
- Firmness: Medium 6/10
- Dye: Completely Through
- Finish: Full Aniline (Learn more about full aniline and return policy)
- Burnishable: Yes
- Thickness: 5.0oz (2.0mm) +/- 0.2mm
- Splitting: Yes, down to 0.6mm *Please note split leather cannot be returned
- Restocked: Yes, every 3-4 months
ADDITIONAL DETAILS
Nemesis Vegetable Tanned Leather comes from the Badalassi Carlo Tannery in Tuscany, Italy. They are well known for their traditional methods of vegetable tanning with tree barks that go back 100's of years. Badalassi Carlo is a member of the exclusive Pelle Vegetale Consortium certifying they tan leather using the strict traditional vegetal methods. We offer serialized certification tags you can attach to your finished products HERE
This veg tan leather is their top grade, it is full grain and has a nice supple feel with a small amount of firmness. This leather has a beautiful rustic dyed finish with a varying small and smooth grain. This leather article has a beautiful vintage depth to the leather color.
The veg tan will have an amazing patina as it ages. The leather is dyed completely through and has a nice soft flesh side. It has a great feel in the hand and is also easy to cut and skive.
DIMENSIONS & PRICING
- Panel: 1 square feet (~7 x 20.5 inches): $23.99 panel
- Panel: 2 square feet (~12 x 24 inches): $46.99 panel
- Panel: 3 square feet (~18 x 24 inches): $69.99 panel
- Please note we guarantee you will receive the correct square footage, but the length and width are approximations and can can vary panels are approximations and can vary by 1-4". Contact us first if you have any specific requirements
- Full Shoulders click HERE
- For larger hides click HERE
THICKNESS
- 5oz (2mm +/- 0.2mm)
LEATHER SPLITTING
- Leather splitting is a custom service available down to your preferred thickness
- Please note split leather can't be returned
- There is a tolerance to leather splitting. While we have invested a lot of time and training into hitting a tighter tolerance range than advertised, sometimes the leather articles and differing densities require the full tolerance range.
- Leather tolerance is denoted by +/- which means the leather can be both above and below that number by the denoted amount.
- Example 1.2mm +/- 0.1mm.
- This means that the leather could come anywhere ranging from 1.1-1.3mm across the hide. Most the time this amount is indiscernible to the naked eye, but should be noted if measuring with precise equipment
- How we gauge the leather is with a thickness gauge that can reach both the edges and middle of the hide. We apply a moderate amount of pressure (Not too hard and not too soft)
- Again our tolerances are tighter than the tanneries. We are usually well inside the range, especially on panels, but occasionally need the full range. Tolerance ranges are as follows:
- Splitting Panels: +/- (0.1mm).
- Splitting Full Hides & Half Hides: +/- 0.15mm
- No Splitting (From Tannery Splitter): +/- 0.2mm
- The width of our splitter is 30 inches. If you have a hide that is larger we will trim the hide to fit and return you both pieces. We cut off the belly section leaving you the nicest area of the hide in tact.
- Due to it requiring often multiple passes we do not send the split flesh part.
WHOLESALE
We are the Official North America distributor for Badalassi Carlo. We can offer the discounts on FULL HIDES (Double Shoulders)
WHAT TO EXPECT?
- Will my panel be perfect? Read about leather here before purchasing
- Shipping and Return Info Here
This is the detail