Maryam - Kangaroo Vacchetta - Veg Tanned Kangaroo Leather (HIDES)

PRODUCT SPECS

• Article:  Kangaroo Vacchetta
• Tannery: Maryam (Italy)🇮🇹
• Tannage: Vegetable Tanned
• Full Grain: Yes
• Cut: Wholehide
• Grain (Top): Smooth
• Flesh (Bottom): Smooth Nap
• Firmness: Medium 5/10
• Dye: Completely Through 
• Finish: Full Aniline
• Burnishable: Yes
• Thickness: 2.5oz (1.0mm) +/- 0.2mm
• Splitting: No 
• Restocked: Yes, every 3-4 months
• Yield: Moderate 75%+, With a natural product like leather, there can be areas with neck and back wrinkles, veins, scars, bites, loose grain, but in general this article can expect an overall high cutting area. Areas where cutting yield can be low is near the belly and legs where the hide can have loose grain and wrinkles.  This leather being full aniline (meaning the leather is very natural with no extra finishing on the surface to hide any flaws) darker colors will better hide any areas of concern. A key skill of using full aniline leather is the ability to work less desirable areas of the hide into the less visible areas of your projects.
• Discounts: Yes, volume discounts automatically apply on full hides. you can mix and match colors. Note Paypal does not load the discounts, please pay with credit card instead 

Please note the images are a representation of the actual product, the leather you receive may look different than it appears on your screen. This is due to the way monitors and devices project color. We suggest that you request sample(s) before ordering when color is critical. Also there can be differing dye lots with each batch of production and it is best practice to buy all your needs for a project at a single time. Product descriptions are to the best of our knowledge, if you notice any errors please contact info@rmleathersupply.com

Leather splitting is a custom service available down to your preferred thickness

Please note split leather can't be returned

There is a tolerance to leather splitting. While we have invested a lot of time and training into hitting a tighter tolerance range than advertised, sometimes the  leather articles and differing densities require the full tolerance range. 

Leather tolerance is denoted by +/- which means the leather can be both above and below that number by the denoted amount.

• Example 1.2mm +/- 0.1mm.
• This means that the leather could come anywhere ranging from 1.1-1.3mm across the hide. Most the time this amount is indiscernible to the naked eye, but should be noted if measuring with precise equipment

How we gauge the leather is with a thickness gauge that can reach both the edges and middle of the hide. We apply a moderate amount of pressure (Not too hard and not too soft)

Again our tolerances are tighter than the tanneries. We are usually well inside the range, especially on panels, but occasionally need the full range. Tolerance ranges are as follows: 

Splitting Panels: +/- (0.1mm).

Splitting Full Hides & Half Hides:  +/- 0.15mm

No Splitting (From Tannery Splitter):  +/- 0.2mm

• The width of our splitter is 30 inches. If you have a hide that is larger we will trim the hide to fit and return you both pieces. We cut off the belly section leaving you the nicest area of the hide in tact.
• Due to it requiring often multiple passes we do not send the split flesh part.